Intermec IF4 Fixed RFID Reader

This product has been retired. Please contact sales to discuss replacement products.
  • An intelligent peripheral – capable of internal filtering to reduce network traffic
  • Software configurable to read/write EPC Class 1, EPC Gen 2 and ISO tags
  • Factory configurable to operate in 865MHz, 869MHz, 915MHz or 950MHz
    RFID bands
  • Directly monitors and controls presence detectors and signal lights
  • Downloadable firmware for migration path to ISO 18000-6c

Product Overview
Joining a diversified line of RFID readers, the Intermec IF4 serial reader is the ideal RFID peripheral for applica­tions where an edge server or Program­mable Logic Controller (PLC) is used for process control. The IF4 reduces the com­munications burden on the network and processing demand on the host PLC.
While reading and writing RFID labels and tags, the IF4 uses an air-interface protocol for filtering out unneeded tag data caused by multiple reads and tags not required for the application.

General purpose input/output (I/O) cir­cuitry enables the IF4 to monitor and/or control peripheral devices while keeping the cost of ancillary equipment and instal­lation down.

After the IF4 controls the selection of appropriate tags for reading, it then combines its pre-configured application parameters with the information from the selected tags in order to activate external sensors as well as control audible and visual indicators.

Country specific power cables.
FCC & ETSI Antennas and cables

Operating Temperature: -20°C to 55°C (-4°F to 131°F)
Storage Temperature: -40°C to 85°C(-40°F to 185°F)
Humidity (non-condensing): 10% to 95%
Shock: 10 G, 11ms, half sine pulse(operating)
Vibration: 1.0 GRMS. 10 to 500Hz, 3 axis (operating)

Physical Characteristics
Length: 19.1 cm (7.5”
Height: 6.6 cm (2.6”)
Width: 13.5 cm (5.3”)

Input: 90-260VAC, 50-60Hz
Output: 9VDC, 2.6ADC

Getting Started

User’s Guides and Manuals